Laminators and Film

contactshipcallwe ship worldwide

Ledco HD-38 and HD-60 Heavy Duty Industrial 38" and 60" Laminators $27,642.05

Ledco HD-38 and HD-60 Heavy Duty Industrial 38" and 60" Laminators $27,642.05

Heavy duty laminators for commercial laminating services, digital imaging service, color labs, printing businesses, military installations, map publishers.

Ledco is known for making machines which are very reliable, easy to use, and inexpensive to maintain.
These units maintain that reputation.

Warranty: Two-year factory warranty

Big tough and productive...

That's what the heavy-duty Ledco 38 and 60-inch are all about. Owners of these machines say there is nothing else like them for dependability, speed, quality of lamination, ease-of-use, and low maintenance. These machines have old-fashioned value...that is, the work and revenue they can produce far exceeds their cost to purchase and service.

The demand for lamination of larger materials is rapidly growing, yet only a fraction of all laminating services have a machine that will handle materials 36 inches or bigger. Most laminators in finishing departments or shops are 25 inches wide. These big Industrial Series laminators can help you enter this market or increase your capacity to handle big sheets.

Who uses big laminators? Laminating services. Digital imaging services. Color labs. Printing businesses. Reprographics shops. Government offices. Military installations. Map publishers. Any organization that needs to protect large-format printed materials.

Industrial Series Standard features
Here are some of the reasons these machines get rave reviews from their owners:
  • Intelligent heat controllers display both the set temperature and the actual temperature. The microprocessor in the control quickly learns to anticipate the heat demand of each job and keeps the actual temperature within a few degrees of the set temperature.
  • Laminating and pull rollers are covered with quality silicone rubber for superior release quality, higher lamination quality and easier cleaning. The laminating rollers and pull rollers are interchangeable to help keep maintenance costs down.
  • Pneumatic power opens or closes the laminating and pull rollers and gives you a precise and independent control of roll pressure. A compressor is built in so that shop air is not required.
  • Removable heat shoes are Teflon coated to reduce film abrasion. They are easily unplugged and removed to clean or replace the laminating rollers.
  • Built-in retractable slitters save an enormous amount of cutting time by trimming away side scrap during the lamination process. The two heads can be adjusted independently with great precision.
  • Dual tension knobs (clutches) for each supply roll mandrel are easy to use and provide as little or as much tension as needed to keep work flat and wrinkle free.
  • Forced air cooling is essential when running thicker films, because the lamination needs to be cooled to get good results. These machines have rows of fans mounted above and below the film as it leaves the laminating rollers.
  • Easy access controls are conveniently located and grouped for effective operation.
  • The safety guard is built into the feed tray, and the machine will not run without the feed tray in place. Stop buttons on both sides of the machine front and back contribute to a complete safety package. The back rollers are also guarded.
  • Both upper and lower rollers are driven to minimize the wrinkling or curling that can occur when one roller is driven.
  • A removable bottom idler bar makes it much easier to thread film.
  • Standard precision feed tray has both left and right side guides and is adjustable from a few inches to the width of the machine.
  • All electrical components conform to NRTL standards
Industrial Series Optional Equipment
  • Roll feed option allows you to laminate material from a 3" core supply roll mounted just above the feed tray. Designed for digital imaging and industrial applications. Included on the HD60. Additional option for HD38
  • Footage counter enables accurate measurement of film. Call for price.
  • Additional slitters permit multiple-up cutting. Call for price.

With the Industrial Series Laminators... you can preserve and protect:

Maps Charts Signs Book Jackets
Posters Promo Materials Photographs Blueprints
Calendars Counter Mats Menus Art Prints

Industrial Series Specifications

Max Laminating Width 38" 60"
Speed 0-35fpm 0-35fpm
Laminating Roller Diameter 3" 3"
Supply Roll Core Size 3" 3"
Recommended Film Up to 10 mil Up to 10 mil
Max Laminating Thickness 1/2" 1/2"
Max Film Roll Diameter 16" 16"
Dimensions 60"L x 58"H x 40"D 78"L x 58"H x 40"D
Shipping Dimensions 71"L x 43"W x 66"H 91"L x 43"W x 66"H
Weight / Shipping Weight 565 lbs. / 1,000 lbs. 865 lbs. / 1,300 lbs.
Electrical (Single Phase) 220V (Single Phase) 220V
Watts 40 amps 40 amps
Heater Wattage 7200 watts 7200 watts
Motor 1/4 HP DC 1/4 HP DC

Click for Operation Manual

Click for Industrial Series Laminator Schematics

HD38-60 Release Liner Takeup Installation Procedures

Click for Checking the Heat Relay

Click for Industrial Series Replacement Parts

The The Industrial series laminators required a mandatory crating for shipping.

  • Models: 7038200A, 7060200, 7060203A, 7138000, 736000, H380 186.5, H360 146.5, 7238200 & 7060200Crating
  • Manufactured by: Ledco Inc.

Please Choose:
Check the box for the product, then add to the cart.

Industrial HD Series

Add to Cart:

Customers who bought this product also purchased...

Copyright © 2022 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices, images and specifications subject to change without notice.**

PIA Member    D & B Verified

For your convenience, we accept these credit cards:
Credit Card Logos