Ledco Laminator

contactshipcall

Ledco 30" Automatic Sheet Feeder

Ledco 30" Automatic Sheet Feeder

The Sheet feeder is completely self contained and mounted on caster for easy movement. It is precision engineered to a high standard and is quick and easy to set up with a minimum of adjustments.

Sheet Separation:
Sheets are separated at the front by blowers and forwarded by a suction drum mounted over the pile. An adjustable tongue front with integral blowers controls the top sheets in the pile. Suction and blow are delivered by a pump mounted on the frame.

Pile Hoist:
The pile table is motorized and controlled by a single UP/Down switch. An adjustable limit switch controls the pile height automatically while running.

Side Register:
The side lay ball guidance is mounted above a wide transport belt and positioned according to paper size. An independent micro screw enables sheets to be exactly aligned.

Operation Controls:
Controls for main switch ON/OFF speed adjustment and ON/OFF switch for suction roll and belt-drive are located on a central point.

 

Specifications

Max sheet size (Normal set-up) 29.38 x 25.25 inches
With Sheet table extension 29.38 x any length
Min sheet size 3.75 x 5.75 inches
Max pile height 27.75 inches
Feed speed with gear motor 0-82 ft/min
Power supply 220V/60 Hz. single phase, 20 amps
Weight w/o pump 238 lbs
Shipping Weight 595 lbs, 56 x 43 x 61 H inches

Call for Quote for Sheet Table Extension

Click for Operators Manual

Click for Automatic Sheet Feeder Replacement Parts

Please Choose:
Check the box for the product, then add to the cart.

Automatic Sheet Feeder 30 inch








Add to Cart:
Copyright © 2017 GWJ Co. All rights reserved.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices subject to change without notice.**

PIA Member

For your convenience, we accept these credit cards:
Credit Card Logos